Blackman Rowe

LTP Resin, Polymer & Epoxy Residue Remover


LTP resin, polymer & epoxy tile residue remover removes all types of resin, grout polymer & epoxy residues. Suitable for interior & exterior use.

A low odour, non caustic treatment that softens residues left by jointing compounds and grouts making removal from the surface of natural stone, glazed ceramics and porcelain much easier.

  • Non hazardous
  • High performance
  • Low odour
  • Gentle removal
  • Drip free formula
  • Easy to use
  • Interior & exterior use
Directions for use


Ensure that the surface to be treated is completely clean and dry. If necessary, first wash surfaces with ECOPROTEC Stone & Tile Intensive Cleaner. Rinse well with water to finish.

Removing Residues:

Apply generously by dabbing on with a cloth or brush. Work in manageable areas of no more than 5 sq metres and do not brush out. Leave for up to 30 minutes. Do not allow the solution to dry out. If drying should occur within 30 minutes apply a little more solution to keep it wet. Use a stiff short haired brush or emulsifying pad to remove softened coating from the surface. Repeat the process if unwanted material remains. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application.

If removing residues from epoxy grout; apply making sure to avoid prolonged contact with the joint as well. This solution should not drip if used on vertical surfaces. However protect acrylic & other sensitive plastic surfaces such as baths and shower trays from contact.

APPLICATION 1 ltr 5 ltr
Surface cleaning 10 M² per bottle 50 M² per bottle
Deep stripping 5 M² per bottle 25 M² per bottle
In extreme cases 3 M² per bottle 12 M² per bottle

View our full range of LTP products. We’re a proud retailer of LTP


Please call 01872 864402 to place your order

* Prices are an indication and subject to change

WordPress PopUp Plugin